BHWS-otázky-a-odpovědi-zápočet-1

B. situation where the packet is routed through the same router twice

C. Situation where the packet does not reach it\'s destination

D. situation where the packet is routed through the same sequence of routers until the TTL expires

1. Which of the following would prevent unknown clients from connecting to your AP? Choose the BEST answer:

A. . Uncheck "Default Authenticate" in the wireless card configuration, and add each known client's MAC address to your access-list configuration ensuring that you enable "authenticate" in the entry

B. Add each known client's MAC address to your access-list configuration is the only step needed

C. Configure the radius server under "/radius"

D. Check the "Do not permit unknown client" box in the wireless configuration

E. Uncheck "Default Authenticate" in the wireless card configuration, and add each known client's MACaddress to your connect-list configuration

1. You want to share the same user and password for different computers. Whichc menu is used for configuration?

A. /ip hotspot walled-garden

B. /ip hotspot user profile

C. /ip hotspot profile

D. /ip hotspot ip-binding

1. You can not use OSPF and RIP routing protocols simultaneously on the RouterOS

False

1. When adding a user to your local ppp secrets/ppp profiles database, it is possible to

A. Allow/deny use of more than one login by this user

B. Set max values for total transferred bytes (up- and download)

C. Allow login by pppoe and pptp, but deny login by l2tp

D. Deny services (like telnet) only for this user or for one group of users

E. Allow only pppoe login

Dál nevím

1. What is true about Bandwidth Test tool (select all that apply)

A. Only work on MikroTik Router OS

B. Can be downloaded on default router webpage

C. Tests throughput between two MikroTik devices

D. Can be used to monitor throughput to a remote device

1. Action=redirect can be used in NAT chain src-nat

False

1. Mark all packages required for PPPoE server on MikroTikRouterOs

A. synchronous

B. radius

C. user-manager

D. ppp

E. system

1. It is required to make a web server on a private LAN visible on the Public Internet. Only the web server port should be visible to public. Whichc of the following configuration steps should be met

A. A route between the NAT Router and the webserver must exist

B. Connection Tracking must be enabled on NAT router

C. LAN address of the webserver should be routable on the internet

D. in ip firewall NAT there should be a dst-nat between the public ip of the router and the private ip of the webserver

E. Public IP address of the webserver must be installed on the NAT Router

1. What action should be used to inform source that packets reached destination, but was not accepted?

A. action=accept

B. action=drop

C. action=tarpit

D. action=reject

1. In whichc order are the entries in Access List and Connect List processed?

A. By Signal Strength Range

B. In sequence order

C. In a random order

D. By interface name

1. Two mangle rules defining different mangle marks for the same traffic type, will make it have both mangle marks.